shop116 is proud to announce that our walnut display trays were showcased in the Ottawa Citizen May 2nd edition of Marketplace: Warm Up Your Home With Wood.
For more options and details, please visit our Centrepiece Display Trays page.
2017 started with an intense deadline for shop116 – building our ‘Cutting Edge’ Table for the 2017 Toronto Interior Design Show. Here is a quick look at how the table came together.
shop116 took a different approach from some other reclaimed furniture designers. We decided to make the table shape simple and precise, accenting the knots and interesting figure of the wood. By removing the surface patina, we exposed the underlying beauty of aged pine.
The pine boards used to make this table were acquired (repurposed) and cleared of all fasteners from their previous uses.
After dressing, the boards were cut to width. The boards were glued together using a double dado joint and splines. Aluminum channels were inset into the end of each board joint which would later be used to connect the table extensions to the main table top.
Resin was applied to all the holes, knots, and splits in the wood.
The laser-cut walnut shop116 logo was inset into the underside of the table and encased in resin. All the excess resin was sanded to prepare the table top for final dressing with a drum sander.
shop116 used a router and jig to precisely chamfer the table sides, leaving a 3/16″ vertical edge.
The two extensions were cut and the table took its final form. A reciprocating saw was used to cut through the wood and aluminum simultaneously.
The jig was reconfigured for the shallower angle, and the ends were cleaned up. A metal milling bit was used to rout flush the wood and aluminum simultaneously.
The table legs were planed to achieve the angled look, then trimmed to size. The table top was routed to receive the legs. Each leg was carefully fitted and glued to the table top.
The table was sanded, cleaned, then oiled to be ready for its debut at the 2017 Interior Design Show. If you missed us at the show, here is a picture of our table on display. Next on our list are the benches…